the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 Ford Escort ZX2 Speakers


Post ReplyPost New Topic
< Prev Topic Next Topic >
jonny5 
Member - Posts: 2
Member spacespace
Joined: October 23, 2004
Location: United States
Posted: October 24, 2004 at 9:08 PM / IP Logged  

When installing a new head unit in my car (topic) I had to remove a clip with a bunch of wires jumped between each other, to put the speaker clip in. Now the back speakers don't work at all. So I figured that I would connect all the left + wires together and the left - wires together since this is how it looked like they were jumped. Still nothing....

Any input will be very much appreciated. Thank you in advance.

stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: October 24, 2004 at 10:25 PM / IP Logged  
Dude, don't connect speaker wires together in parallel to a head unit.  You'll fry the deck in no time flat with low impedance.  Disconnect the wires you put together.  I don't understand what you mean by a "clip" and how a bunch of wires seemed to be jumped to each other.  Did you buy a wiring harness with that deck you're installing?
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
cerwinvega4 
Member - Posts: 12
Member spacespace
Joined: October 12, 2004
Location: United States
Posted: October 24, 2004 at 11:20 PM / IP Logged  
Dont these cars have a factory amplifier under the driver's seat? If so, you can run speaker wire from the outputs on your deck and hook up to the output side on the factory amplifier going to the rear speakers.
jonny5 
Member - Posts: 2
Member spacespace
Joined: October 23, 2004
Location: United States
Posted: October 25, 2004 at 6:07 AM / IP Logged  

Here is a picture of the factory clip I removed

 99 Ford Escort ZX2 Speakers -- posted image.

There is also a square adapter but I think that goes to the CD changer.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer