Stock HU/LOC

Home / the12volt's Install Bay / Car Audio / Stock HU/LOC (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

peterw244

Member - Posts: 18

Joined: October 13, 2004

Location: United States

Posted: November 02, 2004 at 9:48 PM / IP Logged

Hey guys, this weekend, finally...im installing a friends system. He has a 95 millenia wit the factory bose speakers, amp n HU. Would any Line output converter work that I buy or should it be a special one because he has about 4-5wires i think going into that little amplifier. so should I just cut the wires rite before it, wire both of them with the new ones out of the LOC together? then RCAS from the LOC to the new aftermarket amplifier?

or do I need a special LOC to work with it or tap into another area? help me out if im going about it all work. thanks

peterw244

Member - Posts: 18

Joined: October 13, 2004

Location: United States

Posted: November 02, 2004 at 9:50 PM / IP Logged

sorry, hes going to keep everything stock except put in an aftermarket amplifier to power the subwoofers he wants to lay in the trunk

peterw244

Member - Posts: 18

Joined: October 13, 2004

Location: United States

Posted: November 03, 2004 at 9:16 PM / IP Logged

bump

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Stock HU/LOC

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.