sub enclosure problem

Home / the12volt's Install Bay / Car Audio / sub enclosure problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

richyrich487

Member - Posts: 2

Joined: November 22, 2004

Location: United States

Posted: November 22, 2004 at 3:34 PM / IP Logged

I have an 04 nissan frontier extended cab, while i have found alot of advice concerning subwoofer enclosures for the crew cab I have found none for my truck(at least within my financial perameters). I have a rockford fosgate P212S4 sub that I would like to build a ported box for that would fit behind the drivers seat and the port would fire under my seat. I 've tried using winisd alpha but my driver is not listed and when i tried to add my driver it gave me an unreal box size and port demension. has anyone dealt with this or know where i can go for an example to this?

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: November 22, 2004 at 7:01 PM / IP Logged

Stolen from Crutchfield's page on your woofer:

Recommended Vented Box Volume: The vented box sizes recommended by Rockford Fosgate range from 1.25 cu/ft to 2.0 cu/ft. Within this range, the ideal size recommended by Rockford Fosgate is 1.75 cu/ft, so this is the enclosure recommended by Crutchfield. One 4" diameter x 11" long port should be used with a 1.75 cu/ft enclosure.

Support the12volt.com

bumpingjeep

Copper - Posts: 149

Joined: September 12, 2004

Location: United States

Posted: November 22, 2004 at 7:17 PM / IP Logged

i have used that size box with that exact size port on a p2s4 before...sounds good...i have also tried 2cube with a larger port but square instead of round...both tuned the same...the smaller box sounded better...they were both in the same car...talon...running off the same amp...punch 800a2...if you can fit the 1.75 cube in there do it...if not...make space...you will be happy you did...never a bad idea to do what DYohn says anyway

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

sub enclosure problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.