ohm rating for memphis components

Home / the12volt's Install Bay / Car Audio / ohm rating for memphis components (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

AJRXtreme

Silver - Posts: 302

Joined: June 08, 2004

Location: United States

Posted: December 20, 2004 at 10:34 AM / IP Logged

I just bought a pair of 15-MCSQ6.5's and i am trying to decide which amp to buy to power these front components and the back coaxials. The components are rated at 50rms/100peak, and the coaxials are rated at 50rms/220 peak. Should i buy the memphis mclass amp that is 4x75 at 2ohms and 4x50 at 4ohms, or the same amp but 4x115 at 2ohms and 4x75 at 4ohms. I wanted to know what the ohm rating was for these components and if they are 2ohms then i will prolly end up going with the 4x75 at 2ohms. Thankyou

03 F150 on 24's

HU:Pioneer DVD5700

Frt:MC57

Subs:(12)S12L7

Amps:(3)KX2500.1's, MC-2004

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 20, 2004 at 2:24 PM / IP Logged

almost all component sets will have a 4 ohm rating, and I am sure these have a 4 ohm rating as well. I would use a 4x75 to power all the way around the car.

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

kfr01

Gold - Posts: 2,121

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 30, 2003

Posted: December 21, 2004 at 1:42 AM / IP Logged

Only worry about the 4-ohm rating for those components and coax speakers.

Go with the 4x75 if you have the extra money handy... headroom never hurts. But there will probably be very very little difference in what you actually hear.

New Project: 2003 Pathfinder

kfr01

Gold - Posts: 2,121

Joined: April 30, 2003

Posted: December 21, 2004 at 1:43 AM / IP Logged

Just remember to get your gains set by someone professionally AND use high pass crossovers.

New Project: 2003 Pathfinder

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ohm rating for memphis components

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.