3 Amp Installation

Home / the12volt's Install Bay / Car Audio / 3 Amp Installation (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

acclu97

Member - Posts: 16

Joined: January 03, 2005

Posted: January 05, 2005 at 6:29 PM / IP Logged

I recently decided that I am going to power the stock bose supwoofer found in my center console (2005 Yukon) with a kicker zr-120 that I had for my highs (more info on another thread). I am planning on buying a soundstream 360.4 to push my highs, and I have a fosgate punch 800.2 pushing two JL audio 10w6's. I know my setup sounds very random but it is stuff that I have had from previous systems, etc... As it is right now, I ran a power cable from the battery, and then split it between the two amps. To install this third amp, can I just split this one power cable coming from the battery to the three amps.... I will not be pushing this system very hard and will likely have the gains on all the amps very low.... Is there anything else I should know before I install this?

Back to Top

vinspo

Copper - Posts: 74

Joined: October 24, 2004

Location: United States

Posted: January 05, 2005 at 7:42 PM / IP Logged

Need to know the size of power cable and current draw of the amplifiers. Also, are you using a distribution block?

Back to Top

Drewt

Copper - Posts: 183

Joined: January 04, 2005

Location: United States

Posted: January 05, 2005 at 8:58 PM / IP Logged

I'd say go with 1/0 gauge (or 4 gauge if you're cheap) from the battery to a distro. block, and then either 4 gauge or 8 gauge (use the biggest size the amp will take , or whatever is recommended) from the block to the amp. Do the same thing for the grounds (4-8 gauge from amps, 1/0-4 gauge for the chassis connection)

If you post the specs of the amps (what size fuses are on them), then we can help you more. Going with 1/0 gauge from the battery and you'll be safe.

-Drew

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

3 Amp Installation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.