Eclipse Amplifier Question

Home / the12volt's Install Bay / Car Audio / Eclipse Amplifier Question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

peterhead

Member - Posts: 10

Joined: January 05, 2005

Location: United States

Posted: January 05, 2005 at 8:29 PM / IP Logged

I have a 2001 toyota tacoma and am looking into some eclipse amps. I was looking at the DA7232 or the DA7122 to put on two eclipse titanium tens. I have a yellow top optima and going to put two 1 farad caps in but im still worried about voltage problems. Which amp would be better for what I am wanting to do. Thanks in advance.

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: January 06, 2005 at 12:27 AM / IP Logged

Factory alternator or High Output? Big 3 wiring upgrade done in the engine bay? When you say you're worried about voltage problems, what do you mean...that you won't have enough power available or that you've had problems with that vehicle before?

Back to Top

wheelerdr

Copper - Posts: 337

Joined: October 25, 2004

Location: Louisiana, United States

Posted: January 06, 2005 at 12:37 AM / IP Logged

with these two dvc 4+4 ohm tens I would go with the DA7232 because you can run one ten in the left channel and one to the right channel with a 2 ohm load, the DA7122 is a mono amp rated at 2 ohms, using the 2 channel at 2 ohms per channel by hooking up both + and both - of one ten to one channel, and then do the same for the other channel with the other ten, this will get the most out of this amp and will sound great.

Back to Top

peterhead

Member - Posts: 10

Joined: January 05, 2005

Location: United States

Posted: January 06, 2005 at 11:17 AM / IP Logged

Factory alternator and what are you referring to when you say big 3 wire upgrade? and no i have never had problems out of it before just trying to prevent if im not going to have enough

Back to Top

sedate

Silver - Posts: 1,173

Joined: July 03, 2004

Location: Colorado, United States

Posted: January 06, 2005 at 1:01 PM / IP Logged

I'm just guessing about big three wiring upgrade:

1) Upgrade Alt-batt wire

2) Upgrade Battery Groud

3) ??

Back to Top

stevdart

Platinum - Posts: 5,816

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: January 06, 2005 at 1:46 PM / IP Logged

...and alternator casing to engine block ground. (...and someone please correct me if I'm wrong...) ...or is it engine block to chassis??

Back to Top

peterhead

Member - Posts: 10

Joined: January 05, 2005

Location: United States

Posted: January 06, 2005 at 1:47 PM / IP Logged

Yeah thats what i figured the first two were, just don't know what the 3rd one is

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Eclipse Amplifier Question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.