2005 Silverado 12v source

Home / the12volt's Install Bay / Car Audio / 2005 Silverado 12v source (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jwitt

Member - Posts: 1

Joined: January 12, 2005

Posted: January 13, 2005 at 12:15 PM / IP Logged

I am installing a Soundgate KNGM1V6 translator to connect a Sirius Kenwood tuner to the RDS radio. My question is what is the best place to get the +12 volts?? I have read here that the Ign or battery wire at the back of the OEM radio is only 6 volts and not a good option. Thanks, JIM

Back to Top

jaurora

Silver - Posts: 429

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 16, 2004

Location: United States

Posted: January 13, 2005 at 3:26 PM / IP Logged

Constant +12 Volts:

RED

IGNITION SWITCH HARNESS

This wire will be seen below the steering colomb. It is a heavy guage wire. This is a constant 12vdc so be sure to use a fuse. Also only use this wire if the unit you are hooking up is less then 15 amps. Going to the battery is more prefferd!

MECP certified (If it really means anything)

Jeremy

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 Silverado 12v source

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.