sub combo

Home / the12volt's Install Bay / Car Audio / sub combo (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jimmyrose

Member - Posts: 24

Joined: December 21, 2004

Location: Australia

Posted: February 02, 2005 at 1:25 AM / IP Logged

hey guys, my amp finally arrived, it puts out 900W RMS (2000 max) @ 1 ohm (class d) and i dont know what sub combo to hook up to it. just after some recommendations. should i get a DVC with 2ohms/coil or 2 DVC with 4ohms/coil or 2 SVC 2ohm/coil. i dont want to spend too much and am kind of limited for space.

will 4 ga wire be enough for this kind of power? ive read that it wont be, but the owners manual says 4ga (or bigger)

Back to Top

bullman96

Silver - Posts: 294

Joined: October 03, 2004

Location: United States

Posted: February 02, 2005 at 1:34 AM / IP Logged

how much are you willing to spend?

Back to Top

bullman96

Silver - Posts: 294

Joined: October 03, 2004

Location: United States

Posted: February 02, 2005 at 1:35 AM / IP Logged

oh yeah, i would go with 2 guage to be safe. depends on the distance between the amp and battery

Back to Top

jimmyrose

Member - Posts: 24

Joined: December 21, 2004

Location: Australia

Posted: February 02, 2005 at 3:20 AM / IP Logged

yeah i was thinking 2 ga but sh*t its hard to find here, gotta get it specially sent in. not really more than 600 aus $. i know its not much, but the info on had on the amp before i bought it off ebay didnt mention it was 1 ohm stable and i want to use it to (almost) its full potential. i was thinking of a planet audio DVC 12" 2400W, 2 ohm per coil. i know they are good for amps, but how are they for subs?

Back to Top

jimmyrose

Member - Posts: 24

Joined: December 21, 2004

Location: Australia

Posted: February 02, 2005 at 3:22 AM / IP Logged

oh and ive got a long time to think about it now cause most of my funds are going into fixing my god damn accident. free air subs arent an option either cause its a unibody

Back to Top

jimmyrose

Member - Posts: 24

Joined: December 21, 2004

Location: Australia

Posted: February 05, 2005 at 4:36 AM / IP Logged

anyone?

Back to Top

wheelerdr

Copper - Posts: 337

Joined: October 25, 2004

Location: Louisiana, United States

Posted: February 05, 2005 at 5:47 AM / IP Logged

I would go with a fosgate punch3 sub dual 2 ohm and drive to 1 ohm

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

sub combo

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.