4 ohm dual voice coil sub

Home / the12volt's Install Bay / Car Audio / 4 ohm dual voice coil sub (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

etusick

Member - Posts: 8

Joined: January 29, 2005

Location: United States

Posted: February 09, 2005 at 8:09 PM / IP Logged

Just wondering if wiring each of the voice coils to a seperate channel on a 2 channel kicker amp would sound any better than bridging. Thanks alot............Audeogod especially..

ertusick

Back to Top

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: February 09, 2005 at 8:34 PM / IP Logged

would not sound any better, and if you feed to diffrent signals into it, left and right. instead of the same mono signal it could lead to something very very bad, like a blown sub. I would recommend just bridging it if you amp can handle the load the sub will present at the amp

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

4 ohm dual voice coil sub

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.