faseing

Home / the12volt's Install Bay / Car Audio / faseing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ningnang480000

Member - Posts: 2

Joined: February 14, 2005

Location: United Kingdom

Posted: February 14, 2005 at 5:51 AM / IP Logged

i want to build a pre amp that will nock a anologe signal 180 degres out of fase

ben@:

Search for other posts by ningnang480000

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: February 14, 2005 at 10:23 AM / IP Logged

It's called "phase." There are lots of ways to do this, including simply switching + and - signal leads. What exactly are you trying to accomplish?

Support the12volt.com

ningnang480000

Member - Posts: 2

Joined: February 14, 2005

Location: United Kingdom

Posted: February 20, 2005 at 8:18 PM / IP Logged

Thanks for the reply

My idea is that if I was to get a an eletritic mic and feed it into a simply phase circuit then run it through my amp it would have some sort of sound deadening effect, I understand that the circuit would be more practical if it was a tunable phase circuit but then it will probly be to complicated for me. Any more info would be appreciated.

ben@:

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

faseing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.