the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Speaker Problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
trdgts 
Copper - Posts: 50
Copper spacespace
Joined: March 02, 2003
Location: United States
Posted: February 15, 2005 at 10:07 PM / IP Logged  

I'm hoping it's not blown, but I dont know what the problem is.

I have a/d/s 6.5 components. recently i've noticed the sound will muffle when it hits a certain low frequency...mainly a lower frequency. i tend to hear it muffle on lower hard rock guitar chords. i havent messed with the cross overs, and the wiring still seems ok.
i dont know where to start to correct the problem by tweaking settings, or if it's a lost cause cause the speaker is blown.
any ideas? thanks.

deocder 
Copper - Posts: 138
Copper spacespace
Joined: December 27, 2004
Posted: February 16, 2005 at 9:01 PM / IP Logged  
Perhaps the speaker is rubbing against something? When the lower notes hit, the cone will move out further. If there is something obstructing it, then it will cause it to sound funny. Make sure that the door panel is not against it.
Captanham 
Silver - Posts: 365
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 18, 2004
Location: United States
Posted: February 16, 2005 at 9:42 PM / IP Logged  
it could just be over driving, if the woofer is being held back because it's driving to far out then that could distort the rest of the sounds, if you have an eq try cutting off some of the lowest bass that you can, or any subsonic range sounds,
Bad Boys Customs
    audio - video - security
If you use it. Suport it. Donate to the 12 volt!
soundmasta 
Silver - Posts: 246
Silver spacespace
Joined: November 17, 2004
Location: United States
Posted: February 18, 2005 at 7:43 AM / IP Logged  

somtimes after you've had a system for a while, it starts to sound different to your ears. if both drivers are having the same problem, maybe you're just "getting used to it". i think the fist thing i would do is zero eveything out, all your amps, eq settings, crossovers, ect., and take it to a local shop. they'll probably charge $20-$30 to tune it, and that way if it doesn't soud great when they're done, you'll have someone to bitch at. also, they will be able to test the speaker and tell if it is blown for sure. i wouldn't think it is though, because usually a blown speaker sounds bad at all frequencies and volume levels.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer