enclosure question

Home / the12volt's Install Bay / Car Audio / enclosure question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

redchevy99

Member - Posts: 28

Joined: January 02, 2005

Location: United States

Posted: February 19, 2005 at 4:10 AM / IP Logged

when i cut out the mounting ring on my box i cut it too big. so only a few of the screws actually screw into the wood. i dont have any spare mdf wood. all i have is 1/4 inch thick plywood. all i need to do is screw a new piece of wood over the old hole and cut this one out right and i need to know if that thin wood will work or not. my subs a fosgate power t1 12" and im scared it will just pull the screws out or break the wood. so what im askin is will that work or should i wait till i get some more mdf? help me out fellas.

wheelerdr

Copper - Posts: 337

Joined: October 25, 2004

Location: Louisiana, United States

Posted: February 19, 2005 at 4:27 AM / IP Logged

I would wait

Copper - Posts: 137

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 16, 2004

Location: United States

Posted: February 19, 2005 at 4:39 AM / IP Logged

yeah I would get some mdf and pull the box apart and do it correctly you don't want any noise from that plywood, man that sucks, well live and learn.

redchevy99

Member - Posts: 28

Joined: January 02, 2005

Location: United States

Posted: February 19, 2005 at 5:29 AM / IP Logged

well alright then...i just didnt wanna mess with pulling the box apart cuz of the glue and everything. its gonna be a pain in the ass.

supradude

Silver - Posts: 915

Joined: September 21, 2004

Location: South Carolina, United States

Posted: February 19, 2005 at 8:55 AM / IP Logged

If you don't want to take it back apart you could take another piece of 3/4 mdf and cut it the same size of the top. Use Liquid Nails and seal the 2 tops together. This time cut the sub holes before you seal it up.

'85 Toy

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

enclosure question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.