Using OEM Delco radio out of vechicle

Home / the12volt's Install Bay / Car Audio / Using OEM Delco radio out of vechicle (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

n381cc

Member - Posts: 2

Joined: February 24, 2005

Location: United States

Posted: February 24, 2005 at 8:59 PM / IP Logged

How do you power up the 04, 05 basic Silverado radios with 24 pin connector.? I've connect Ground to black, +12 to Orange, ties the small orange ign. Have tried reverse wiring harness connector. So far none of the radios will power up. What am I missing here? Thanks for any help.

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 24, 2005 at 9:05 PM / IP Logged

I believe its the Yellow wire. I think the Orange one is for memory.

n381cc

Member - Posts: 2

Joined: February 24, 2005

Location: United States

Posted: February 24, 2005 at 9:12 PM / IP Logged

Only aftermaket OEM connector has a yellow wire, and it says ign. But the radio will not power up. The OEM connector has only has the Orange power wire. I have always been able to make a radio operate on the bench. Are these new GM radio so different? What do you have to do to make them work on the bench?

johnmax

Copper - Posts: 131

Joined: November 15, 2003

Posted: February 24, 2005 at 9:25 PM / IP Logged

Uhhh... these are data radios.

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 24, 2005 at 11:04 PM / IP Logged

Ya thats true. 2003 I believe they went to the data bus. Not sure what they would need on a bench.

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: February 25, 2005 at 1:08 PM / IP Logged

they wont...you need a special module and an AC Delco ACT unit to test them........ it cost me over 10 grand....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 25, 2005 at 8:36 PM / IP Logged

Well now don't guess we will be doing that Using OEM Delco radio out of vechicle -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Using OEM Delco radio out of vechicle

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.