add amp subs 99 durango

Home / the12volt's Install Bay / Car Audio / add amp subs 99 durango (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jwro

Member - Posts: 1

Joined: February 28, 2005

Posted: February 28, 2005 at 7:28 PM / IP Logged

I want to add an amp and subs to my infinity system . I have replaced factory speakers with reference series . I plan to limit bass from these with caps . my question is how can I get signal to the amp for the subs ? also, what wire controls switched power to the stock amp , and can i have it turn on the second amp also?

Thanks

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: March 01, 2005 at 9:07 PM / IP Logged

I would recommend buying a wiring harness. That would eliminate the guess work. Use a line level converter to get the signal to your subs. I would email tech support at the following place and ask if they have a harness. http://www.autosoundgear.com/tek9.asp?pg=contact%20

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

add amp subs 99 durango

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.