the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 Cavalier Radio Swap


Post ReplyPost New Topic
< Prev Topic Next Topic >
w762nato 
Member - Posts: 1
Member spacespace
Joined: March 28, 2005
Location: Canada
Posted: March 28, 2005 at 11:39 AM / IP Logged  

I want to change the factory AM/FM radio in a 2005 Cavalier to one that will also play Mp3 CD's. Either a OEM takeout or aftermarket Mp3  in dash players.

 A salesman at an Electonics store tells me the Factory radio will have to stay in the car for (security, diagnostic, and airbags?)

I have installed many car radios going back before 8 tracks but none in the last 25 years.

Is it really that complicated to switch one now?

Chad7n7 
Silver - Posts: 408
Silver spacespace
Joined: March 09, 2004
Location: United States
Posted: March 28, 2005 at 11:49 AM / IP Logged  

Alot of the newer GM vehicles have a Class II Data Bus system, in which when you remove the factory HU, you lose some of the factory features ( door chime, on-star, factory alarm) due to the fact that it is interfaced into the HU.

There are a couple options on how to go about this, there is a harness that will retain your factory HU in the somewhere in the vehicle. I usually put it under the passenger seat. Alot of installers elect to put in in the trunk. Either way is suffice. It will not power up or affect your new head unit, its just there as a data device after removal.

There are also a couple companies that put out an interface, that will enable you to retain your factory features without having to keep the factory HU in your car.

You will also need an antenna adapter. All of this can be purchased at your local stereo shop.

Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: March 28, 2005 at 12:28 PM / IP Logged  

Your vehicle is indeed more complicated than a standard vehicle. Removing the factory radio will NOT affect the air bags but will affect all the systems chad listed above. As he said there are two ways to do this properly, either relocate the factory deck or use the interface module. Its not nessasarily a diffficult thing to do, just takes a little more time than usual, and costs far more money than a standard vehicle would.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: March 28, 2005 at 2:13 PM / IP Logged  
use the Metra GMRC-01 adapter kit and then just wire up the radio you want to put in as usual...it's a 20-30 minute install.....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer