2005 Altima radio removal

Home / the12volt's Install Bay / Car Audio / 2005 Altima radio removal (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: March 29, 2005 at 10:03 PM / IP Logged

Does anyone have any information on this vehicle yet? I'm trying to remove the factory radio in a 2005 Altima Base model. It has the AC vents on the sides and a small storage compartment above the radio. Any info or even photos are greatly appreciated. Also, does anyone know if this vehicle has a databus? Will I mess anything up by removing the stock radio?

Back to Top

outtaluck72

Copper - Posts: 155

Joined: August 04, 2003

Location: United States

Posted: March 30, 2005 at 7:54 AM / IP Logged

the trim around the a/c controls just unsnap. remove the 4 screws that hold the a/c controls in. then the trim panel around the radio including the pocket above the radio just unsnaps. remove the screws holding the radio in and you're done. the harness is the metra 70-7550. hope this helps.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 Altima radio removal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.