speaker problem

Home / the12volt's Install Bay / Car Audio / speaker problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sooners78

Member - Posts: 5

Joined: May 07, 2005

Location: United States

Posted: May 23, 2005 at 10:24 AM / IP Logged

I had a pair of Memphis Audio 40 watt speakers in the front, being powered by a 4 channel (50 watt/channel) amp. They were doing fine, but I had a pair of Infinity 60 watt speakers that I wasn't using, so I decided to put them in instead. Now, when I turn up the volume about half way, one of them shuts the entire system down and it won't come back on until I shut the engine off. All four speakers have good sound at the low volume. The system was working fine with the old speakers, even at higher levels of volume. Thanks for any help you can give.

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: May 23, 2005 at 10:31 AM / IP Logged

Sounds like either a bad speaker or speaker wire, or the gain on the amp is too high causing it to go into protection, and the different speaker impedence is triggering it.

Support the12volt.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

speaker problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.