Sub handling

Home / the12volt's Install Bay / Car Audio / Sub handling (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

chisam14

Member - Posts: 37

Joined: July 31, 2004

Location: United States

Posted: June 02, 2005 at 12:36 PM / IP Logged

Is it harder on an amp to push a 15" 2ohm sub, or a 10" 2ohm sub. Does it put more of a load on an amp to push a bigger sub or does the amp just see the resistance.

Back to Top

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: June 02, 2005 at 2:41 PM / IP Logged

As far as strain on the amp, at equal gain the only thing that matters is impedance so there will be no differance. Now if the effiancey is differant and you want equal volume out of either sub, the less effiant sub will put more strain on the amp.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Sub handling

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.