Tip for Ice-link Installers

Home / the12volt's Install Bay / Car Audio / Tip for Ice-link Installers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

audifive

Copper - Posts: 89

Joined: June 02, 2004

Location: United States

Posted: June 02, 2005 at 4:57 PM / IP Logged

after installing a couple of ice link ipod interfaces for BMW, the customers soon came back claiming a lot of noise was coming through the system. the noise got louder with the RPM of the vehicle. well, it turns out that the company that makes these put the pin for ground in the harness in the wrong spot. its in the 3 pin harness with red, blue, and black wire (ground wire is the black one). moving the pin or wiring a jumper will take care of the noise issue. grounding it to the body will not help much because it causes a ground loop and the noise stays.

hope this helps

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Tip for Ice-link Installers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.