1996 crown vic stereo wiring

Home / the12volt's Install Bay / Car Audio / 1996 crown vic stereo wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dashemv

Member - Posts: 2

Joined: June 03, 2005

Location: United States

Posted: June 03, 2005 at 8:34 AM / IP Logged

A friend of mine has a 1996 crown vic and I was wondering if anyone here knows the stereo wiring codes, or a site that does, and also the easiest ways to run the power wire thru the back seat to the trunk. Also where is the best spot to route the wire thru the firewall? Any feedback would be greatly appreciated Thanks

2000 Toyota Celica GT-S

Not stock

Pioneer AVIC-N1, 2x Alpine Type S Component sets, Alpine Type R 5 1/4" Coaxials, 2x Alpine Type R 12's, Alpine V12 5 channel 450w amp, Alpine V12 1000w mono amp etc

Back to Top

hawn13

Copper - Posts: 171

Joined: April 13, 2005

Location: Hawaii, United States

Posted: June 03, 2005 at 9:06 AM / IP Logged

vehicle wiring on this site has it. the easiest way to get to the trunk would be to take out the bottom part of the back seat. then run up the middle behind the top part. there should be a grommet on the passenger side to go intop the engine. also when mounting ans amp in trunk DO NOT screw it on the shelf any where the gas tank is mount right up to it on both sides. I had a coustomer come in and wanted use to remount it after he tried to do it himself o yeah right through the tank. either mount it to the box or right to the back side of seat using mdf or if the amp is big enough you might be able to mount it to the rear seat support.

Back to Top

dashemv

Member - Posts: 2

Joined: June 03, 2005

Location: United States

Posted: June 03, 2005 at 11:52 AM / IP Logged

cool man thanks for the help I really appreciate it.

2000 Toyota Celica GT-S

Not stock

Pioneer AVIC-N1, 2x Alpine Type S Component sets, Alpine Type R 5 1/4" Coaxials, 2x Alpine Type R 12's, Alpine V12 5 channel 450w amp, Alpine V12 1000w mono amp etc

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1996 crown vic stereo wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.