Kenwood DDx7015

Home / the12volt's Install Bay / Car Audio / Kenwood DDx7015 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dior_steele

Member - Posts: 1

Joined: June 13, 2005

Posted: June 13, 2005 at 2:51 PM / IP Logged

I installed a kenwood ddx7015, when I ran the system to my amp I have engine noise. I changed the ground, replaced the amp, tryed new wires, and also used a filter. But still have the noise. Can anyone help me?

Bigsingh

Copper - Posts: 204

Joined: March 26, 2005

Posted: June 13, 2005 at 3:05 PM / IP Logged

errm i had da same prob wid a pioneer deh 5500 and i sent it back to pioneer and apparently it had a problem with da pre-amp on da head unit so if u get it checked on another system from a mate and see if its da head unit, if not ur head unit needs to be grounded or ur amp needs to be grounded, but try it out!

6* Rockford T2's

6* POWER AMPs

BLACK CORRADO

BAANNGGIINN

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kenwood DDx7015

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.