the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1999 Nissan Altima Amp Install


Post ReplyPost New Topic
< Prev Topic Next Topic >
Cartdawg 
Member - Posts: 1
Member spacespace
Joined: July 08, 2005
Posted: July 08, 2005 at 1:27 PM / IP Logged  

Hey guys....i'm about to install an amp in my Nissan...And I was just curious if anyone knew where a grommet under the hood might be located in my Altima so that I could get the  power wire thru to the inside.  Is there a car diagram somebody knows of that I could look at?  Or does anyone know where one might be off the top of their head?

I've looked under the hood...and I dont really see one...also on the inside under the carpet....theres that black plastic type lining all over the floorboard.........so its like......yay!

Anybody know a solution to make this easy as pie?  I know how to install the thing...just wondered if anyone knew anything more so I didnt have to fish the dang wire thru the wheel well panel.

Thanks!

Blowntweeters 
Silver - Posts: 650
Silver spacespace
Joined: June 03, 2005
Location: Nevada, United States
Posted: July 09, 2005 at 3:57 PM / IP Logged  
drill a hole if you dont want to put it threw the fender  well also check the right side of the master cyl. for a grommet  if you still can.t find one drill a hole just be careful not to drill into anything
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer