04 silverado amp wiring route

Home / the12volt's Install Bay / Car Audio / 04 silverado amp wiring route (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

silverado_lr4

Member - Posts: 3

Joined: July 23, 2005

Location: United States

Posted: July 23, 2005 at 1:07 PM / IP Logged

Hi, there I'm new to the forum, and I just purchased an 04 Silverado and I'm wanting to run a power wire for an amplifier, just needing help in routing it, Does anyone know of a good spot in the fire wall where thers a grommet or will I have to drill a hole for the power wire. Any help is really appreciated.

Thanks,

Jose

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 23, 2005 at 1:13 PM / IP Logged

What gauge wire are you trung to run ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

silverado_lr4

Member - Posts: 3

Joined: July 23, 2005

Location: United States

Posted: July 24, 2005 at 10:11 AM / IP Logged

i believe is 8 awg.......thanks

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: July 24, 2005 at 11:35 AM / IP Logged

look on the outside (underhood) of the firewall....theres a spot where ther clutch would go thru if it were a manual trans ....thats the spot to drill your hole. With 8g wirw you might slip it thru a large factory rubber grommet....be careful you dont damage any wires allready in the grommet. Make sure your cable is REAL CLEAR of the ebrake, and the mechanism. That thing willl shred a power wire

silverado_lr4

Member - Posts: 3

Joined: July 23, 2005

Location: United States

Posted: July 24, 2005 at 12:03 PM / IP Logged

Thanks for the info!.... I'll try it later..its raining..lol.

TruckSystem

Copper - Posts: 185

Joined: March 18, 2005

Location: United States

Posted: July 25, 2005 at 9:39 AM / IP Logged

I put a 4 gauge wire through that factory grommet with no problems, 8 guage will go through there.

2003 Chevrolet Silverado Standard Cab ~ Alpine CDA-9851

Diamond Audio D3600.1 ~ 2x Diamond Audio TM310D4

Diamond Audio D3400.4 ~ Diamond Audio Hex S600s

AstroStart RS5204 Remote Start/Alarm

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 silverado amp wiring route

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.