the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Need Delco pin config for Aux


Post ReplyPost New Topic
< Prev Topic Next Topic >
RIckV 
Member - Posts: 2
Member spacespace
Joined: July 27, 2005
Location: Netherlands
Posted: July 27, 2005 at 3:17 PM / IP Logged  
I have a Delco FM/AM Cassette car radio and a seperate Delco CD-player (radio model 15764357, mounted in a Chev. Tahoe 2000, non-Bose system). I want to hook up my IPOD using its line out to the AUX-in of the Delco on which the CD-player is connected. Does anyone know the pin config of the Delco car radio
Many thanks - Rick
jstruckman 
Copper - Posts: 465
Copper spacespace
Joined: May 03, 2004
Posted: July 27, 2005 at 4:54 PM / IP Logged  
Use the SoundGate SDS1 to get an aux in (as long as you have remote player, tape or CD).
Jazzy
jstruckman 
Copper - Posts: 465
Copper spacespace
Joined: May 03, 2004
Posted: July 27, 2005 at 4:55 PM / IP Logged  
Sorry meant to say SDSGM1, not SDS1.
Jazzy
RIckV 
Member - Posts: 2
Member spacespace
Joined: July 27, 2005
Location: Netherlands
Posted: July 27, 2005 at 7:31 PM / IP Logged  
THanks - I've indeed been looking at this option. But I was thinking as the Delko CD-player is feeding a line signal into the headunit, it should be possible to hook up (solder) a cable onto the connector inside the headunit if I know the pin config - so the Soundgate would not be necessary.
Anyone?
Thanks - Rick

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer