Install Schematics

Home / the12volt's Install Bay / Car Audio / Install Schematics (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sk8terchick4241

Member - Posts: 1

Joined: July 28, 2005

Posted: July 28, 2005 at 10:45 AM / IP Logged

Wondering if anyone knows of a good website that provides install schematics or if anyone can give me some install info (such as a wiring diagram) for some subs and an amp i just got. Info...

Car= 1996 Eclipse

Subs= 2- 10" Pioneer 450w IMPP in a Pro Bend Competition Bandpass r/t box

AMP= Jensen- 2/1 channel... 500watt...2 ohm stable (mosfet power supply, xa2125)

P.S. The box was given to me and the amp is drilled into the back of the box, is that the best place for it to live or would it be more productive if i put it under the seat or something?.. sorry i know nothing about systems and any help would be appriciated. thanx

Back to Top

Search for other posts by sk8terchick4241

haemphyst

Platinum - Posts: 5,054

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: July 29, 2005 at 5:16 PM / IP Logged

Here's your wiring diagram...

The amp just needs a battery lead - an 8 gauge kit would be PLENTY for that amp... follow the instructions included in the kit, but basically, BIG blue wire from battery + to + terminal on amp, and silver wire from chassis to - terminal on amp, small blue wire to blue wire in dash - either the one on the deck labelled remote (if aftermarket), or the switched 12v in the dash.

Since your amp is already "installed" - leave it where it is... make your life easier.

Pretty simple really, but if you need more help, let us know!

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Back to Top

Francious70

Silver - Posts: 629

Joined: July 26, 2004

Location: United States

Posted: July 29, 2005 at 5:52 PM / IP Logged

Well hello sk8terchick, listen to much Avril?? Stick around, you may enjoy it here.

Paul

Back to Top

rottenbelly

Copper - Posts: 99

Joined: July 29, 2005

Location: United States

Posted: July 29, 2005 at 10:30 PM / IP Logged

make sure u bolt or strap the box down in case u are a stunt driver like me. other wise it could slide around and pull wires lose since amp is on box

rottenbellys 05 crew cab colorado.Pioneer dehp 880prs, kenwood excelon in all 4 doors. Bazooka 500 mono Jl 10w3 in coustom center console box.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Install Schematics

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.