soundstream reference lse.q problems

Home / the12volt's Install Bay / Car Audio / soundstream reference lse.q problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ek4d16civic

Member - Posts: 2

Joined: August 02, 2005

Posted: August 02, 2005 at 2:11 AM / IP Logged

i have a soundstream reference 1000s 2 channel amplifier

the problem is when i switch the lse.q in(on)

the left works but the right channel doesnt work

both channels work fine when the lse.q is out(off)

is there something wrong with the amp

or is it suppose to be like that?

ek4d16civic

Member - Posts: 2

Joined: August 02, 2005

Posted: August 02, 2005 at 6:52 PM / IP Logged

i have also tried the amp on briged mono with the lse.q in and there is no signal comming out

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

soundstream reference lse.q problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.