visonik v108w

Just Bought a Visonik V108W 10 inch subwoofer and the verdamt thing came with no spec sheet (T/S parameters) Anyone know where to go to get these? I tried the Visonik website and there was nothing there about that particular driver. I either have a really new or a really old speaker here. Bugs the heck out of me that they would put a product out and not have any pertinent information included in the package. How the heck am I supposed to design and build a box for this thing?

Not surprising for a cheap Chinese knock-off brand.  It's often because the T/S parameters are completely unknown since the design has never been tested.  Put it in 1 cu ft sealed and give it about 200 watts and that's probably the best you can do with it.  Or use it for a door stop.Support the12volt.com

  DYohn damn your good!   i did a search and found this for your sub. sealed .75-1.15 cu ft. ported 1.75 cu ft. but it did not give port sizes.

Thanks for the compliment, but it's not that I'm so good it's that 1 cuft is safe for almost any 10" or 12" subwoofer.  Support the12volt.com

DYohn wrote: Thanks for the compliment, but it's not that I'm so good it's that 1 cuft is safe for almost any 10" or 12" subwoofer.

 

yes i know just trying to build your esteem up

Well thanks for the reply guys! But upon further review there actually WAS a T/S spec sheet buried under all the the packaging. Homer here (me) was just not looking in the right spot D'OH! ;-)