the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Ground problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
vaslim777 
Member - Posts: 1
Member spacespace
Joined: December 07, 2005
Location: United States
Posted: December 07, 2005 at 7:34 PM / IP Logged  

I've got a 2002 Rodeo with a Pioneer AVIC-N1 and 2 AMPS. It has worked fine for years and now I have crazy ground noise. I have sanded the surfaces down and checked the battery terminal.  I tried to reground each amp separately by drilling into the vehicle metal with metal screws. Now the ground noise is unbarable. Would it be best to use a distribution block and hook all of the major grounds to that?  Also what would be the best place to ground the distribution block? Seat bolt or just drill directly into the frame?

Thanks

Seth

alpinejedi 
Member - Posts: 17
Member spacespace
Joined: December 07, 2005
Location: United States
Posted: December 07, 2005 at 7:46 PM / IP Logged  
You might try refrencing your grounds.  All you have to do is take a multimeter test your battery voltage when the cars running.  Next put the red probe in your power wire and take the black probe and touch a piece of metal,  if the voltage matches then ground it there.
Chad
Basic certified
Install Sr. at Best Buy
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: December 07, 2005 at 8:06 PM / IP Logged  

Try grounding the outer shield of the RCA's at the deck.  Pioneers are not great on quality control, and it sounds to me like these are not grounded anymore inside the deck.

Do not use a seat belt mount bolt to ground because there's usally a weld there (more resistance).  Make your own hole and scrape to bare metal.

My ex once told me I have a perfect face for radio.
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: December 07, 2005 at 10:22 PM / IP Logged  
check you battery,       Your fluid could be low in the battery and your not getting enough current or voltage.   We had a customer that we worked on his car for 2 days and then on a fluke thing replaced the battery and that was it
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 12, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer