1992 4-Runner rear speaker problem

Home / the12volt's Install Bay / Car Audio / 1992 4-Runner rear speaker problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gtovar61

Member - Posts: 3

Joined: November 15, 2004

Location: Honduras

Posted: January 01, 2006 at 9:31 PM / IP Logged

I have a 92 runner an recently changed the factory radio, I used the wiring that I found in another post, but my rear speakers don't give any sound, any ideas what could be happening? 1992 4-Runner rear speaker problem -- posted image.

PD. the speakers were working with my old radio.

Thanks in advance

GT

Back to Top

dschild

Member - Posts: 1

Joined: January 01, 2006

Location: United States

Posted: January 01, 2006 at 10:15 PM / IP Logged

Did your factory radio have an external amp? If it did the radio would have only one connector on the back from the amp and 2 connectors on the bottom of the amp. Most aftermarket wiring adaptors fit these 2 connectors. On the factory 10 way connector, pins 8 and 9 are for the power ant. and amp. Pin 8 BLACK/ red wire is for the ant. pin 9 pink/blue is for the amp. If your new radio has wires for a power ant (blue) usually and an external power source (blue/white). the blue/white need to go to the pink/blue on the factory harness. My adaptor harness had pins 8&9 with a loop between them. I cut the loop and put the blue/white to the amp wire, as I wanted my power ant to still function as normal and not stay up all the time. Hope this helps, I just went through this today with my 95 4 Runner. Email me if you have any questions.

Back to Top

gtovar61

Member - Posts: 3

Joined: November 15, 2004

Location: Honduras

Posted: January 01, 2006 at 10:46 PM / IP Logged

Well I'm not sure if it has it, what I'm sure of is that I found all the wires listed in the post metioned above and did a 1 to 1 connection, everything works but the rear speakers.

My car doesn't has the power antena and I didn't get the wiring harnnes (had to cut all the wires on the factory connector) 1992 4-Runner rear speaker problem -- posted image.

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: January 02, 2006 at 9:51 AM / IP Logged

Pull the deck, and connect the blue/white on the stereo to the pink/blue as suggested above.

My ex once told me I have a perfect face for radio.

Back to Top

gtovar61

Member - Posts: 3

Joined: November 15, 2004

Location: Honduras

Posted: January 16, 2006 at 12:04 PM / IP Logged

Sorry for the late feedback, your suggestions fixed the problem, thanks a lot!! 1992 4-Runner rear speaker problem -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1992 4-Runner rear speaker problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.