OEM infinity voltage

Home / the12volt's Install Bay / Car Audio / OEM infinity voltage (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tym1200

Member - Posts: 13

Joined: March 21, 2004

Posted: January 03, 2006 at 9:03 PM / IP Logged

I have the factory infinity system in my 95 eclipse, and i'm installing an aftermarket amp in place of the old one. My new amp has screws for adjusting the input voltage. Does anyone have any idea of what the output voltage on one of these is? Thanks

Back to Top

Hornshockey

Silver - Posts: 520

Joined: January 31, 2005

Location: Texas, United States

Posted: January 03, 2006 at 10:34 PM / IP Logged

input voltage = gain; there is so much info on this site about setting gains. Even if you don't know what the input voltage is, if you know the power rating of the amp you can set that level correctly.

Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

OEM infinity voltage

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.