Why do my amps sound delayed ?

Home / the12volt's Install Bay / Car Audio / Why do my amps sound delayed ? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Dan M C

Copper - Posts: 220

Joined: June 10, 2002

Location: Romania

Posted: December 22, 2002 at 5:10 PM / IP Logged

I have 4 amps in my system,they are Nakamichi's PA series.When i turn my HU "on" (also a Nakamichi) seems that my tweeter amp comes in first then the rest kinda delayed ,i don't have anything to delay them,they just seem to be that way...,i have dedicated amps for my tweets,mids (5.25" and 4") and my subwoofer.It's all linked to the remote turn on wire from the HU then thru a Bosch relay.Is this normal ?,it doesn't bother me but it's kinda different i guess.Is this a bad thing or not ?,i used Monster Cable Powerflex 4 gauge wire to the distrib. block then all get a 8 gauge.The car it's all installed it's a BMW ,since the battery is in the trunk all wires are very short.The batt. is an Optima red top,i also have 2 caps for all the amps,a 1F and one 1/2F. Why do my amps sound delayed ? -- posted image.

Thank you

Dan M C

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: December 22, 2002 at 8:10 PM / IP Logged

Some times when running multiple amps you encounter little turn on problems like that If It only lasts a second or two I wouldn’t worry about it. But it sounds like a quality set up you have there.

Dan M C

Copper - Posts: 220

Joined: June 10, 2002

Location: Romania

Posted: December 23, 2002 at 5:08 AM / IP Logged

That's correct "bberman1",it is just for a few seconds only at turn-on,thank you for clarifing that for me,i apreciate it. Why do my amps sound delayed ? -- posted image.

Why do my amps sound delayed ? -- posted image.

Dan M C

FullForce

Copper - Posts: 103

Joined: April 09, 2002

Location: United States

Posted: December 23, 2002 at 5:33 AM / IP Logged

In case you dont already have one, install a relay on your remote wire from the radio or it may not last long!

FullForce

Copper - Posts: 103

Joined: April 09, 2002

Location: United States

Posted: December 23, 2002 at 5:34 AM / IP Logged

duh, i cant read ... lol

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Why do my amps sound delayed ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.