Sub wiring?

Home / the12volt's Install Bay / Car Audio / Sub wiring? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kharr25

Member - Posts: 4

Joined: November 22, 2005

Posted: January 14, 2006 at 7:10 AM / IP Logged

I have 1 JLw3 dual 4ohm...My amp is 460 rms 4ohm stable....

How do I wire this?

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: January 14, 2006 at 8:41 AM / IP Logged

Wire the sub's coils in series for a total 8 ohm load, then bridge across the two channels. The amp will output power at its 2 X __ watts @ 4 ohm rating. (Woofer wiring diagrams to the left...) For a louder sub, switch to a mono amp and wire the sub for 2 ohms.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Sub wiring?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.