SWS-1222D 2ohm to Alpine MRV-1507?

Home / the12volt's Install Bay / Car Audio / SWS-1222D 2ohm to Alpine MRV-1507? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nateg3596

Member - Posts: 4

Joined: January 14, 2006

Location: United States

Posted: January 15, 2006 at 3:41 PM / IP Logged

ok so i messed up. i misinformed you guys and told you that i have the SWS-1242 TYPE S. i took apart my box and behind the speaker, it said SWS-1222D 2ohm + 2ohm.... this is the side of my amp.... http://ampguts.realmofexcursion.com/Alpine_MRV-1507/outside2.jpg my question for bridging my amp is do i connect the 2 positive wires into the positve in CH1? And connect the 2 negatives wires to the negative in CH1? ANd leave CH2 empty? thanks in advance

Back to Top

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: January 15, 2006 at 6:14 PM / IP Logged

no... to bridge that amp you need to take the positive for the left channel and the negitive from the right channel.

but i don't think that amp can handle anything under a 4 ohm load bridge. it could pop if you go lower and not cooled properly for that. i see that you have a 2 ohm sub. but what i don't know is that if you have two of them or just one.and if they are dual voice coils. i'm not fimilar with that sub.although the way you posted does seem like it is a dual voice coil.

please give more info on your setup and equipment.

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

Back to Top

nateg3596

Member - Posts: 4

Joined: January 14, 2006

Location: United States

Posted: January 15, 2006 at 6:28 PM / IP Logged

nah its a 4 ohm and its dvc

Back to Top

fingaz22

Silver - Posts: 410

Joined: March 11, 2005

Location: United States

Posted: January 15, 2006 at 7:25 PM / IP Logged

only one sub, i guess. the only thing you can do with that sub is 2 or 8 ohm and wouldn't be practicaly to that amp.

get a mono amp that will handle the 2 ohm load.

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

SWS-1222D 2ohm to Alpine MRV-1507?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.