multiple remote on wires

Home / the12volt's Install Bay / Car Audio / multiple remote on wires (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

slowfire01

Member - Posts: 16

Joined: October 22, 2005

Posted: January 15, 2006 at 10:51 PM / IP Logged

what would be the easiest way that i would branch a remote on wire into 12 taps, i am running 12 guages in the dash and need additional wires other than one, if i jump on it will only carry the signal to like 3 guages or so right??

thanks

jason

intersts provoke installs

Back to Top

hobobasher

Copper - Posts: 66

Joined: September 23, 2005

Location: Rhode Island, United States

Posted: January 16, 2006 at 1:19 AM / IP Logged

Use a relay on the remote turn on lead.

Heres the link to see the diagram for it

https://www.the12volt.com/relays/page5.asp#rtol

If you have any questions feel free to ask I have alot of experience using that. And it works very well

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

multiple remote on wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.