No power after cap!

Hey guys.. i just installed a cap into my previously working system and now the amp recieves no power as well as the cap lights or digital display are not on! I split my ground and ran one to the amp and one to the cap, i then ran the power directly to the cap and then ran another power cable from the cap to the amp.. i then reconnected the battery power cable to the battery.. and now my cap, amp and sub arent working!! Any ideas? PS: its a 1.2 farred cap with lcd and leds.. none of which are working.. Please help me out!! Thanks

If you did not charge the cap CORRECTLY, you blew your fuses... Check 'em. Also to confirm this, check for voltage at the amplifier terminals.It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

im not sure how to do this.. i thought the cap was charged cuz it made a lil spark when connected to the amp.. i bought it from a pawn shop and it came with all packaging (not sure if brand new).. so what fuses do i check and how to i charge the cap? Thanks

also can u give me step by step on what fuses and how to chrage it along with that tell me when to connect dissconect the battery wire from teh battery and when to return it! Thanks a lot! i just dont wnana mess anything up

just checked the volts and there were a few settings (wasn't sure what one to use so i tried all) i got readins of like .001-.002 or 0.2.. so ur saying my fuses are blown and i need to charge? if u reread my first reply can u please let me know how to do this.. PS: i didn't get a resistor with my cap but i heard i can use a lightblub? what kind? Thanks

now firstly, you have to ground the 2 objects in different places. secondly you cant run a wire from your cap and then to your amp, u need to buy a distribution block for the postive. what u do is send the wire into the dist. block and then run 2 seperate wires from the dist block to the 1. amp and 2. the cap. remember ground them in different places and all wire sizes shud be the same, and this shud solve ur problem.6* Rockford T2's

6* POWER AMPs

BLACK CORRADO

BAANNGGIINN

ok.. what about charging that amp? i shouldn't need to do it?

what do you mean charging the amp, just try the steps i have layed out and hopefully everything will be cool6* Rockford T2's

6* POWER AMPs

BLACK CORRADO

BAANNGGIINN

i am going to.. im just having trouble finding another ground in my trunk (2001 neon).. after i get that done i will wire it up and see how it goes.. rite now im just testing with a bit smaller gauge wire (10) just to make sure it works and then ill go out and buy sum more 6 gauge and do it again!

ALSO.. i meant to say do i need to charge the cap.. And if so ive heard it can be done with a lightbulb? what kind and how many watts? thanks