Earthquake 500.1 Specs

Home / the12volt's Install Bay / Car Audio / Earthquake 500.1 Specs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

projectreefblue

Member - Posts: 8

Joined: March 04, 2006

Location: Canada

Posted: March 06, 2006 at 6:49 PM / IP Logged

I have an Earthquake ph500.1 aplifier and I am having a hard time finding specs on it as I assumme it is quite old.

My best guess is that it is 500RMS x 1 @4ohms.

Any input would be greatly appreciated.

projectreefblue

Member - Posts: 8

Joined: March 04, 2006

Location: Canada

Posted: March 07, 2006 at 4:11 PM / IP Logged

No one is framilar with Earthquake's rating system?

It must have been a very rare amplifier.

pcguy760

Copper - Posts: 154

Joined: August 20, 2005

Location: United States

Posted: March 08, 2006 at 2:54 AM / IP Logged

Earthquake PH500.1

500 W x 1 into 4 ohms

275 W x 2 into 2 ohms

150 W x 2 into 4 ohms

* Two channels of amplification

* Built-in variable crossover - VARIXR

* ELC- equal loudness controls

* Low pass, full range, or high pass operations

* Two independent low level RCA inputs

* Two crossed audio signal RCA outputs

pcguy760

Copper - Posts: 154

Joined: August 20, 2005

Location: United States

Posted: March 08, 2006 at 2:57 AM / IP Logged

BTW, its old skool Earthquake at its best Earthquake 500.1 Specs -- posted image.

projectreefblue

Member - Posts: 8

Joined: March 04, 2006

Location: Canada

Posted: March 08, 2006 at 12:44 PM / IP Logged

Thanks alot pcguy, makes a huge difference in my setup.

Appreciate the input. ProjectReefBlue.

pcguy760

Copper - Posts: 154

Joined: August 20, 2005

Location: United States

Posted: March 09, 2006 at 1:23 AM / IP Logged

No prob, hope it all works out good :)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Earthquake 500.1 Specs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.