Indash dims with bass

Home / the12volt's Install Bay / Car Audio / Indash dims with bass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

redneck999

Member - Posts: 1

Joined: March 11, 2006

Location: United States

Posted: March 11, 2006 at 8:26 PM / IP Logged

I have 1995 Plymouth Neon with an Alpine indash, and a Bazooka amplified bass tube. My question is that when the bass hits on higher volume the indash lights flicker. I have an Optima battery, it is wired up using a metra wiring adapter, the radio is also grounded from the back of the unit to the chassis any help with this would be great. Many thanks!

pcguy760

Copper - Posts: 154

Joined: August 20, 2005

Location: United States

Posted: March 11, 2006 at 8:34 PM / IP Logged

Check your grounding on your amplified bass tube / the amp that runs the bass tube. It could not be getting enough ground.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Indash dims with bass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.