6x9 problem

Home / the12volt's Install Bay / Car Audio / 6x9 problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tee17

Copper - Posts: 93

Joined: March 13, 2003

Location: United States

Posted: March 29, 2006 at 12:42 PM / IP Logged

I have a 2000 dodge intrepid. I just install some 3 way jvc 6x9's. I cant think of the model off hand. My problem is that once i installed these speakers they sound lower than the factory speakers that were in there. Can anyone suggest any reasons for this

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: March 29, 2006 at 1:19 PM / IP Logged

Reverse the speaker leads on one speaker and see how they sound after that.

Top Secret, I can tell you but then my wife will kill me.

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: March 29, 2006 at 1:49 PM / IP Logged

actually an easier way to determine if you have a speaker wired out of phase is just to sweep the balance control all the way to one side or the other...if you have good low-end response with it balanced all the way to one side, but it sounds like you are listening to it through a wind tunnel with the balance in the middle, then you have a speaker out of phase.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

6x9 problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.