GMRC-01 how to lower the volume

Home / the12volt's Install Bay / Car Audio / GMRC-01 how to lower the volume (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

qball46831

Member - Posts: 2

Joined: April 20, 2006

Posted: April 20, 2006 at 2:01 PM / IP Logged

I need help on lowering the volume on the gmrc 01 i bought mine from e-bay and it didn't come with instructions. I have read that the instructions tell you how to lower the volume for the door chime feature. if anyony could tell me how i would apprecite it. thanks

jeff mueller

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: April 20, 2006 at 5:48 PM / IP Logged

I'm anti "FleaBay" so usually I would tell you to take a hike, but I'm in a good mood today. Take the cover off and on the opposite side of where the plug is you will find an exposed jumper wire between resistors 3 and 4 in a closter of 5. Cut the jumper.

There is no such thing as free installation!

qball46831

Member - Posts: 2

Joined: April 20, 2006

Posted: April 22, 2006 at 4:22 AM / IP Logged

if i would have paid more attention to the board it is written right on it with an arrow showing where to cut. i have a version 3.2 and the wire was never installed. their are just two empty holes where the wire should have been. thanks alot for the info anyway.

jeff mueller

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

GMRC-01 how to lower the volume

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.