amp and sub ?

Home / the12volt's Install Bay / Car Audio / amp and sub ? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

low&loud89si

Member - Posts: 2

Joined: April 25, 2006

Location: Canada

Posted: April 25, 2006 at 2:50 AM / IP Logged

I have a 10 Alpine Type R dual 2 ohms in a ported box, running at 4 ohms. To power the sub I'm using a Rockford Fasgate Punch 401S I think it 400 watts. Well my ? is that I just got a JBL BP1200.1 now My 10" is rated at 500rms and 1500peak and the amp is rated at 600x1 @4ohms and 1200x1 @1 or 2 ohms will this blow my sub.

Thanks

Back to Top

boug0752

Copper - Posts: 73

Joined: March 09, 2006

Location: United States

Posted: April 25, 2006 at 8:26 AM / IP Logged

There is a high probabality that it will not blow the sub right away if your careul with it. If I was you, just make sure you keep the power at or below 3/4 to be safe and watch the distortion when using the bass level adjust as this is not just a volume increaser. Other than that it should really pound. Is this in a daily driver by chance?

If your counting pennies and dimes then maybe you shouldn't be spending every penny and dime you have!!

Back to Top

low&loud89si

Member - Posts: 2

Joined: April 25, 2006

Location: Canada

Posted: April 25, 2006 at 12:10 PM / IP Logged

Its in a 89 Civic Si Hatchback

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp and sub ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.