Distribution Block?

Home / the12volt's Install Bay / Car Audio / Distribution Block? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

csprings

Member - Posts: 2

Joined: May 11, 2006

Posted: May 11, 2006 at 4:05 PM / IP Logged

I am running an Absollute DANL600 fused distribution block. I have a 2 gauge power going from the battery to thje power input on the block, and out I have a 4 gauge(i bought it as a 2 gauge but the kit lied its only legit 4) running to a boss blade extreme amp that says 2000 RMS but its probably around 1200, and i have an 8 gauge coming out to a little power acoustik 2 channel speaker amp...150 watts i think? I got all the wires hooked up, grounded the distro block, the lights on the volt reader come up, but the amps won't even turn on. is there anything i am doing wrong or need to check?

Back to Top

mustangfoo

Silver - Posts: 371

Joined: November 16, 2005

Location: United States

Posted: May 11, 2006 at 4:41 PM / IP Logged

check with a DMM to see if you have power coming from the output wires of your distribution block and if you do then check your amps fuses and ground connection and your remote turn on wire check that with your DMM too.

Back to Top

jt824

Copper - Posts: 52

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 17, 2006

Location: United States

Posted: May 11, 2006 at 6:11 PM / IP Logged

You might consider running 4 guage wire straight to each amp and do away with the distrubtion block...the less stuff the better

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Distribution Block?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.