the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Best learning tool?


Post ReplyPost New Topic
< Prev Topic Next Topic >
otto34 
Member - Posts: 36
Member spacespace
Joined: May 01, 2006
Posted: May 31, 2006 at 11:57 PM / IP Logged  
Well I am just looking for the best way to learn more about mobile audio. I have always been the go to guy among my group of friends when it comes to anything electrical be it stereo or hooking up a 220v for a house. I have been happy with that but now I would like to learn more about tuning an audio system or building a box and tuning it for a certain sub. What would be the best way to do this. Books are probably my first choice because working full time and on the side its hard to find time. Also where would I look to find any type of mobile electronics schools in my area?
Thanks in advance!
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: June 01, 2006 at 12:37 AM / IP Logged  
Read all that you can, Thats what i do.
To build sub boxes, read about how to first then try it.
My first sub box was for a friends 12 alpine type E. It was a simple 14 cube but it sure did sound nice. I didnt use glue the first time i put it together but it was still sturdy. I used a hell of a lot of screws. Then one night when i was bored i used elmers school glue, and yes the kind for school. Screwed it back and waited for it to dry.   After it dried i removed the screws to check for strength and damn i was surprised by the strength. Stronger than the screws themselves.
Also ask all of the questions that you can.
luckydevil 
Silver - Posts: 365
Silver spacespace
Joined: July 04, 2005
Location: United States
Posted: June 01, 2006 at 12:49 AM / IP Logged  
Honestly, the people on this forum have taught me more than all my MECP and other car audio books combined. There are some downright car audio geniuses on here.
If you want books though, the MECP study guides are a great source of info. I hear the Loudspeaker Design Cookbook is very good also and that one is next on my list.
MECP Study Guides: LINK
LDC: LINK
Steven Kephart 
Platinum - Posts: 1,737
Platinum spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: November 06, 2003
Location: Oregon, United States
Posted: June 01, 2006 at 12:58 AM / IP Logged  
The Loudspeaker Design Cookbook might be a bit advanced for many beginners.  Instead I highly recommend you reading through this link: www.bcae1.com .  It has great flash animations to help the beginner understand even the more complex concepts.  And of course this site is a huge resource of information.  Look through all technical information in the links on the side, as well as reading and asking questions in the forum.  This forum has some of the most helpful and knowledgable people around.
otto34 
Member - Posts: 36
Member spacespace
Joined: May 01, 2006
Posted: June 01, 2006 at 10:20 AM / IP Logged  
Awesome, thanks a lot guys!
xtremej 
Gold - Posts: 1,440
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 24, 2006
Location: United States
Posted: June 01, 2006 at 10:38 AM / IP Logged  

There is a lot of very useful knowledge floating around this site, I have learned more from this site than any class I took or books I've read. Ask lots of questions and the only stupid question is one you don't ask.  Sub box building is an art imo, I am the only shop in my area that still builds custom boxes and the last tip I'll give ya for now is that the box can make a crappy sub sound good and a good sub sound crappy....

forbidden 
Platinum - Posts: 5,352
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: June 01, 2006 at 12:26 PM / IP Logged  

Even us old dogs still learn a thing or two from the others of this site. Just last month Jeff showed me a different method of sanding bondo, while I showed him how I do vinyl work around corners. There is a wealth of knowledge on this forum, if you want to learn, this is the place to look for answers.

Top Secret, I can tell you but then my wife will kill me.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer