kenwood hu doesn't see cd changer

Home / the12volt's Install Bay / Car Audio / kenwood hu doesn't see cd changer (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jeff13

Member - Posts: 11

Joined: March 02, 2005

Posted: June 03, 2006 at 8:33 PM / IP Logged

Hey guys, I got another kenwood headunit (model number is scratched and can't make it out) that is hooked up to a kenwood cd changer. The headunit will not 'see' the cd changer - can't go to it, can't control it, can't do anything with the cd changer from the headunit. I put in different cd changers with the headunit and this particular headunit is definately the problem because the cd changers will work with other headunits. I've already resoldering many of the connections on the and around the board, since that is a very common problem on these things. I've checked the connector from the cd changer to the headunit - its good. I've checked the pins on the headunit for the cd changer - they all check out good too. I am out of ideas. Anyone have a suggestion other than to junk this thing (which I already suggested to the person asking me to fix it). thanks.

Back to Top

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: June 03, 2006 at 8:39 PM / IP Logged

Did changer reset?

If it did switch changer setting from 0 to 1 or 1 to 0 (mode setting) switch should be near eject button.

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: June 04, 2006 at 1:14 PM / IP Logged

Have you verified the DIN cable is good as well? If not, try it on another unit and see. If it's bad, try a known good one off a working setup.

My ex once told me I have a perfect face for radio.

Back to Top

jeff13

Member - Posts: 11

Joined: March 02, 2005

Posted: June 04, 2006 at 6:55 PM / IP Logged

I don't think the changer reset, I've used 2 different changers and both worked fine on two other headunits, same with DIN cable, used on 2 other headunits, just to make sure I wasn't crazy. I didn't wank the cable out, since it was in the car, I just put another headunit into the car, hooked it up and boom, it works.

Back to Top

Insomniacustoms

Member - Posts: 14

Joined: May 12, 2005

Location: United States

Posted: June 09, 2006 at 1:39 AM / IP Logged

What year is your new Kenwood HU, and what year is your Kenwood CD changer. I believe that Kenwood made it so that any Kenwood disc chager or cd player released in 1997 or earlier, are not compatable with those released in 1998 or later.

Back to Top

Search for other posts by Insomniacustoms

jeff13

Member - Posts: 11

Joined: March 02, 2005

Posted: June 09, 2006 at 11:19 PM / IP Logged

I don't know how old the things are but they did work together for a few years before crapping out. I didn't know that about kenwood stuff, thats pretty interesting.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kenwood hu doesn't see cd changer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.