Port Location?

Home / the12volt's Install Bay / Car Audio / Port Location? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

freebronc

Member - Posts: 2

Joined: June 30, 2006

Location: United States

Posted: June 30, 2006 at 12:26 AM / IP Logged

I need some help guys. I have a Bronco II that has an enclosure in the back with the subs facing up. My question is that I want this to be a ported enclosure. I don't have the room for the ports to be mounted in the face with the subs.....

The subs face up, can the ports be mounted on the side facing the rear....perhaps at the bottom of the enclosure? And, will this affect the sound quality at all? Thank you for any help......Bryan

aznboi3644

Gold - Posts: 2,600

This member consistently provides reliable information

Joined: May 01, 2006

Location: United States

Posted: June 30, 2006 at 1:33 AM / IP Logged

Normally you'd want the ports on the same plane as the subs but it is fine to port out the side or top.

Have you ever seen pre made boxes with ports going up while sub is facing forward?

If you placed the port opening on the bottom of the enclosure wouldn't it be facing the floor meaning pretty much no port anyway?

I'd say to port out the rear.

$0.02

freebronc

Member - Posts: 2

Joined: June 30, 2006

Location: United States

Posted: June 30, 2006 at 1:09 PM / IP Logged

Thanks for the help.......thats what I meant, ports facing rear and the bottom of the box.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Port Location?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.