kdc-mp4028 HU settings

Home / the12volt's Install Bay / Car Audio / kdc-mp4028 HU settings (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

yogibearme

Member - Posts: 5

Joined: September 17, 2006

Location: United States

Posted: September 23, 2006 at 7:51 PM / IP Logged

on my Kenwood HU(kdc-mp4028) when on the crossover settings there is a letters with two settings it is PHAS NML or PHAS REV, could someone explain what it stands for, also my SW level in my HU goes from -15 to +15, when setting the gains in my amp should i have the level at 0 or what do you reccommend..?? kdc-mp4028 HU settings -- posted image.

-GeRmS

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 23, 2006 at 8:01 PM / IP Logged

Sub woofer leval control. nice feature to have. Basically, it's a volume knob for your sub. Phase control: you can set the woofer to be 180 degrees out of phase...it's supposed to "improve" your front stage....make it higher...taller. By running it in rev. the sub and the front mids fire out of sync.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kdc-mp4028 HU settings

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.