the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

'97 Mustang Stereo Swap Woes


Post ReplyPost New Topic
< Prev Topic Next Topic >
ezgoing 
Member - Posts: 1
Member spacespace
Joined: September 24, 2006
Posted: September 24, 2006 at 8:48 PM / IP Logged  

I am attempting to install a nice JVC stereo unit I just bought for my Mustang and am having problems with trying to use the existing car wiring/speakers. I purchased a wiring harness adaptor which seemed to be the correct one, but I am not getting any sound?

I have noticed that the 8-pin speaker connector in the original Ford radio has a metal contact on the one side which makes contact with the factory wiring harness cable. This may be my problem since my aftermarket cable does not address this connector.

If anyone could shed some light on this problem and offer any solution, I would really appreciate it!

Thanks

Mike

Bmnicolosi 
Copper - Posts: 173
Copper spacespace
Joined: January 26, 2005
Location: Louisiana, United States
Posted: September 24, 2006 at 9:35 PM / IP Logged  
is it two flat plugs or is one a squared plug?  if one is a squared plug reach into the dash to the right side and you will find two flat plugs--one gray one black, unplug those from the female plugs they are in, plug the males into the correct female plug {metra part number 70-1770}
If you say "I already know how", don't ask me a single question.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer