escalade 2003

Home / the12volt's Install Bay / Car Audio / escalade 2003 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Dank

Member - Posts: 2

Joined: January 16, 2003

Location: United States

Posted: January 20, 2003 at 2:05 PM / IP Logged

I put in a crimestopper remote start in a 2003 escalade and it seemed to work fine.. but after the vehicle sets for maybe 5 to 6 hours when u try to remote start it the alarm will go off maybe 4 out of 10 atempts.. any ideas??? I have the right wires i think to disarm the factory alarm on start but it jus doesn't seems to work right all the time.

Nick Johnson

Member - Posts: 9

Joined: January 02, 2003

Location: United States

Posted: January 24, 2003 at 2:34 PM / IP Logged

Try calling Tech Support at Crimestopper. Some Tech Support is very helpfull, while others are just short tempered. Did you tap into the factory alarm wires using "T" taps? If you did, that may be the problem. "T" taps are great little time savers, but I've had problems with them being too loose to make a good connection.

Nick Johnson

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

escalade 2003

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.