04 Sierra radio removal

Home / the12volt's Install Bay / Car Audio / 04 Sierra radio removal (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bwrzosek

Member - Posts: 11

Joined: December 23, 2005

Location: Canada

Posted: December 29, 2006 at 4:05 PM / IP Logged

Does anyone know how to remove the factory radio out of an 04 Sierra. I have the bezel off and the 3 screws out but the deck only come out about an inch. I think the cables are stopping it from coming out but i can't see how to get at the connectors.

Thanks

Back to Top

Ctoh

Copper - Posts: 123

Joined: June 15, 2005

Posted: December 29, 2006 at 8:13 PM / IP Logged

Reach behind the radio, it will be caught in the dash toward the driver side of the radio, the harness is wrapped in foam I think, grab it and pull up, it is folded over in this crevice, after you pull that loose the antenna may be caught up as well so you may need to do the same to the antenna...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 Sierra radio removal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.