double din in 01 jeep cherokee

Home / the12volt's Install Bay / Car Audio / double din in 01 jeep cherokee (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

stardust

Member - Posts: 1

Joined: February 19, 2007

Location: United States

Posted: February 19, 2007 at 1:32 PM / IP Logged

Is it possible? If anyone has ever did this, or has seen it done please meesage me. I just purchased an Alpine IVA-W200 for my 2000 Jetta, but would rather put it in my 2001 Jeep Grand Cherokee Limited.

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: February 19, 2007 at 4:21 PM / IP Logged

I have done it a few times. It requires cutting behind the dash and trimming of the bezel. If done neatly it comes out acceptable.

I have also done several by fiberglassing which looks the best but will be time consuming.

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: February 19, 2007 at 4:37 PM / IP Logged

BTW..the ones I have done by trimming I used a Standard chrysler kit by cutting the sides off (rounded part) and glueing them in from behind the bezel..although there may be other methods that can work as well. Good Luck

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

double din in 01 jeep cherokee

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.