1970 chev belair, running wires

Home / the12volt's Install Bay / Car Audio / 1970 chev belair, running wires (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

randauto

Member - Posts: 2

Joined: March 24, 2007

Posted: March 24, 2007 at 11:43 AM / IP Logged

I'm hooking up a system in a stock 1970 Chev Belair, its going to have tweeters in front, 6" in the doors and 6"x9" in the rear deck. The car has no previous wiring for speakers, how would i go about running the wires?

Back to Top

randauto

Member - Posts: 2

Joined: March 24, 2007

Posted: March 24, 2007 at 11:45 AM / IP Logged

Also it will have subs installed in the near future, should the subs have their own amp and the tweeters and other speakers hav their own amp?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1970 chev belair, running wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.